What’s the most suitable option accessible to you if you don’t wish to waste a whole week in replacing your bathtub? Bath tub reglazing takes around 4 or 5 hours and restores your worn, ragged old bathtub to a new like condition. Tempting right?
The most important question that hit you after hearing such a tempting proposition is probably whether you will be able to do it yourself. It will be entirely possible that you may be able to accomplish the task yourself. However it can turn fatal if the right precautions will not be taken. The first thing you need to make note of while reglazing your tub is the safety, as you will have to handle toxic chemicals. It is best to work in a proper ventilated area as some of these chemicals emit toxic fumes. Wearing safety gloves is another precaution you may take. Whether it is possible try to protect every part of your body.
You are armed and prepared to handle the resurfacing bathtub situation. Clean your tub properly. It is advisable to remove the caulk and gasket when you’re washing the tub. Your bath refinishing kit generally has a variety of chemicals. The very first two chemicals are supposed to function as cleaning material. You have to apply the 1st solution and thoroughly scrub the outer lining. Once you are done with that apply the second cleaning solution that may make the surface rough and sore.
Next ensure there is no oil on the surface within the tub in order to provide grip to the primer. The third solution is a solvent that removes any remaining sediment and makes the surface ready for primer. The reducer must be applied with the help of sponges. After leaving the solution for thirty minutes or so clean the region with the primer reducer and permit the bath tub to dry. The tub must be rinsed repeatedly to confirm dryness.
The next step is to protect the region where bath tub refinishing will not be applied. Those areas need to be covered with paper tape. Exercise caution when you’re covering those areas with tape. Ensuring a great seal is of cardinal importance. After you have sealed up the entire content of the area apply base coat in the tub. During this process ventilation is very important and should be ensured. Using your respirators is also a good idea if you have one. Undergo the directions of the manufacturers and mix the primers component accordingly. Spray it on the tub with the help of a spray gun or maybe a similar device.
Now you are almost done refinishing your tub. All you have to do now is color your tub according to your wish. Check out the manufacturers direction while mixing the paint to the topcoat. After the primer has been applied for thirty minutes or so you can apply the topcoat. For applying the topcoat also you may use a spray gun. After you have applied the topcoat watch for 48-72 hours before using your bathtub. Rather your reglazed bath tub!!
