Think that your bathtub is in dire need of replacement but don’t want to waste your entire weekend doing this tedious and boring job? If the answer is in the affirmative then tub reglazing is just the right option for you. This will not take you more then 4 to 5 hours and your bath tub will be as good as new.
You may be wondering if you can do the daunting task of reglazing all by yourself. The answer is, you definitely will if you take care of a few things. The first thing that you have to remember while reglazing is your own safety. This can prove to be fatal if all thecorrect protective measures are not taken. You should cover every possible part if your body as the chemicals used in the process is toxic. It is advisable that you do the work in an open area.
You are now armed for tub resurfacing The first step is to clean your tub thoroughly You should clean remove the gasket and the caulk when you rinse the tub. You can see a wide range of chemicals in the bath refinishing kit. Out of all the chemicals the first and the second are for the purpose of cleaning. You will use the first chemical to scrub th face of the tub and with the second solution you can make the surface sore and rough.
You have to then make sure that no oil is there on any part of thebathtub. If there is oil then the “primer” will not be able to grip properly. Next, you have to use the third solvent to remove the remaining sediment if any. Now the surface is ready for the “primer”. Withf paper towels you will need to spread the reducer. You have to then leave the solution on the tub for about thirty minutes. Then you need to clean with primer reducerto make sure that the surface is totally dry. You should rinse the tub several times to ensure dryness.
Next you need to cover the surface area with tub refinishing in areas where it has not been applied. These areas need to be cautiously wrapped with paper tape. You should check the seal carefully. You have to apply base coat on the tub after sealing off the remianing area. During this time ventilation is very important and you should use respirators if you have them at home. You need to go through the manual thoroughly while mixing the primer’s component. You can spray t on the tub using a spraying gun or something similar to that.
With these steps completed you have reached the last stage of your bathtub renovation. Now you simply need apply a fresh color to your tub that appeals to you the most. Follow the manual carefully when mixing the paint for the top coat. You can use the topcoat after thirty minutes of applying the primer solution. Spray the paint using a spray gun. Now all you have to do is wait for a maximum of 72 hours before you can start using your as good as new bath tub.
Toby Rutherford is a recognized specialist on Bathtub reglazing. To get most your questions clarified about bathtub resurfacing visit his blog on tub refinishing.
